The future is electric for Bundaberg agricultural waste 14th November, 2019 A $1.9 million agricultural waste to bioenergy project that will power electric vehicles within the Bundaberg Regional Council area is one of the first recipients of a grant from the Queensland Government’s Waste to Biofutures Fund (W2B Fund). Minister for State Development, Manufacturing, Infrastructure…
Ancillary Equipment CAL Biogas Relief Valve The valve is opened via the CAL pressure operating on a large weighted diaphragm assembly. The sealing force is proportional to the difference between the set pressure and the CAL pressure. A separate 25mm impulse line is used to connect the CAL to the diaphragm to avoid the cyclic…
Wastewater energy generation Case Study: Wastewater treatment plant and energy generation Client: Teys Australia Project completion: 2019 Location: Naracoorte, South Australia About Teys Australia is a 50/50 partnership between the Teys family and the Cargill Company. The company is the second largest meat processor…
Low Cal Flare Project overview: We designed and supplied a low cal (low calorific) flare for a landfill site with low quality gas. The flare is designed for the flaring of gas with a low methane content and can be operated in 2 modes, “normal” or “lean” gas. Lean gas will be in the range…
Pumping Trial Flare Equipment overview: Pumping trial flare: Energy360 designed this flare to flare gas at 500m³/h at a landfill site in eastern Victoria. The flare is designed to prove the LFG flow and flare the gas. The LFG enters through specialised nozzles and is ignited by a UV interrupted LPG pilot. Flare status, faults…
Biogas Opportunities for Australia A very interesting report, Bioenergy Australia – report ‘Biogas Opportunities’, commissioned by Bioenergy Australia and written by ENEA Consulting, was released last week, identifying the opportunity for the development of a biogas industry in Australia, as well as analysing the barriers and challenges currently facing the industry. The report finds: Executive summary: Biogas is a…
Thermal Oxidiser Project Location: Sydney NSW Project overview: Thermal oxidiser was designed and installed by Energy360 to mitigate the emissions produced by the bitumen storage facility. Vertically fitted with an integral Energy360 burner, the upper chamber and stack are constructed from carbon steel with stack bonded 1,400oC lining. The shell is coated with an insulating…
Skid Mounted Biogas Delivery System Location: NSW abattoir Project overview: This client has been running an Energy360 flare from their new Covered Anaerobic Lagoon for over 4 years. The CAL and the flare are fully proven and the additional step of taking the biogas from the CAL to the boiler was implemented. Energy360 designed, manufactured and…
Biogas Delivery System and OEF150 Flare Project Location: Meat Processing Facility, Queensland Equipment overview: The by-product from the processing plant and waste water, are directed to Covered Anaerobic Ponds (CALs) and from here biogas is captured and used as an alternative fuel source to co-fire the boiler to produce steam for the plant. Energy360 worked…
Flare for Landfill Gas – OEF 300 Location: Landfill site in Victoria Equipment overview: This is a newly designed flare for landfill gas, fully enclosed flare capable of 3,000m3 hr, with re-engineered pipeline placements. Using a PD (Positive Displacement) Blower, the biogas is extracted from the gas wells embedded in the landfill site at high pressure. New…
